Weld-Mate

Air Carbon Arc Gouging Torch, 800 Amp Rating

Model: NT667

Colour, sizing or style depicted in some photos may not be exactly as described.
Please check your product description carefully before placing your order.

Sold as: Each

24 In Stock


Torch Head for Arc Gouging Torch TTU414 | Johnston Equipment

Weld-Mate

Torch Head for Arc Gouging Torch

  • For Use With: NT667

Model: TTU414

Sold as: Each

27 In Stock


Screw M6X15 For Arc Gouging Torch Lever TTU419 | Johnston Equipment

Weld-Mate

Screw M6X15 For Arc Gouging Torch Lever

  • For Use With: NT667

Model: TTU419

Sold as: Each

4 In Stock


O-Ring 13X2.4 For Arc Gouging Torch TTU422 | Johnston Equipment

Weld-Mate

O-Ring 13X2.4 For Arc Gouging Torch

  • For Use With: NT667

Model: TTU422

Sold as: Each

0 In Stock


Upper Insulation Cover for Arc Gouging Torch TTU416 | Johnston Equipment

Weld-Mate

Upper Insulation Cover for Arc Gouging Torch

  • For Use With: NT667

Model: TTU416

Sold as: Each

7 In Stock


Screw Insulation Cover for Arc Gouging Torch TTU417 | Johnston Equipment

Weld-Mate

Screw Insulation Cover for Arc Gouging Torch

  • For Use With: NT667

Model: TTU417

Sold as: Each

29 In Stock


Lower Insulation Cover for Arc Gouging Torch TTU433 | Johnston Equipment

Weld-Mate

Lower Insulation Cover for Arc Gouging Torch

  • For Use With: NT667

Model: TTU433

Sold as: Each

9 In Stock


Rubber Boot Cable For Arc Gouging Torch TTU435 | Johnston Equipment

Weld-Mate

Rubber Boot Cable For Arc Gouging Torch

  • For Use With: NT667

Model: TTU435

Sold as: Each

0 In Stock

  • Amperage Rating: 800
  • Air Requirement PSI: 80
  • Air Requirement kg/cm²: 5.6
  • Air Requirement CFM: 35
  • Air Requirement CMM: 0.076
  • Compressor Intermittent: 5 HP (3.73 kW)
  • Compressor Continuous: 7.5 HP (5.60 kW)
  • Economical air carbon arc cutting process
  • Can be used on most metals
  • Chemical change are virtually nil, as the process is primarily physical
  • Air Requirements: Ordinary compressed air as supplied by a shop airline or compressor is suitable (most applications require 80 - 100 PSI)